BUNDS
HOME
Drum Spill Container
Field proven designEconomical designUsed for storage, decanting and transportSuitable for use with up to 4 x 205 L drumsThe safe way to store, handle and transport hazardous liquids.Although originally designed with safety in mind, a major secondary benefit is the possible recovery of lost contents that could be worth hundreds of dollars. Expensive solvents, exotic machine oils, metals in suspension, are just a few examples that could finish up down the drain, yet it needn't happen. Providing that the materials are suitable, it is possible to decant spilt liquids via one of four conveniently located drainage bungs, through a strainer funnel into a new container. Just one more of the major features offered by the unique and innovative Transtainer SD Spill Tainer.•Can carry 4 full 205 litre drums or numerous smaller containers•Weighs only 60kg•Corrosion and rot proof•2 way fork lift entry points•2 tonne safe working load•Static load rated in excess of 8 tonnes•One piece moulding in high density polyethylene•Dimensions 1240 x 1240 x 285 (mm)All materials are selected to maximise corrosion resistance both from chemical attack and from atmospheric conditions. The Transtainer Drum Spill Tainer incorporates integral skids to allow positioning on semi prepared surfaces.Wooden pallets fit snugly within the raised skirt of the unit.4 conveniently located drainage plugs for decanting . Designed to stack securely when not in use.25mm raised skirt to prevent excess movement
Field proven design
Economical design
Used for storage, decanting and transport
Suitable for use with up to 4 x 205 L drums
drum spill container
IBC Bund
Field proven designUsed for spill free storage and decanting from 1000L IBC'sThe IBC Spill Container incorporates as standard:IBC Spill Container 1000 litreIBC Mounting StandOptional Pump PlatformConceptThe unit is designed to be a self contained transportable assembly.The IBC is positioned on top of the fabricated spill container.Retention capacity of the container is in excess of 1,000 litres. The external container is fabricated from 19mm polypropylene sheet.All seams are fully welded internally and externally. No drillings in the spill container occur below the retention capacity level. The internal support frame and decking are fabricated from extruded plastics.All materials are selected to maximise corrosion resistance both from chemical attack and from atmospheric conditions. The spill container incorporates integral skids to allow positioning on semi prepared surfaces.A 2 drain plug complete with screwed bung is positioned in the right hand front corner.IBC MountingThe IBCs are lifted onto the top deck, guard rails on three sides aid in positioning. The IBC deck is designed to accept both standard 1180 x 1180 mm footprint IBCs and ISO pallet sized IBCs at 1200 x 1000 mm..The IBC deck stands at a height of 1,080 mm to suit truck tray heights. An optional tie down webbing strap is available to locate the IBC in windy environments.Pump PlatformAn optional pump mounting platform is positioned in front of the buffer tank.Pumps, valves, regulators, etc. can be mounted on the platform.All mounted components are within the spill container envelopeStandard EquipmentLift: 4 top lift cables (empty only)Drain: 2 threaded drain bungBase: Integral SkidsMaterialsShell: 19mm polypropylene sheeting Skid: 100 x 100 mm extruded plasticFrame: 100 x 50mm extruded plasticOptionsIBC tie down strapIBC UV Sun Cover
Used for spill free storage and decanting from 1000L IBC's
The IBC Spill Container incorporates as standard:
Concept
The unit is designed to be a self contained transportable assembly.
IBC Mounting
Pump Platform
Standard Equipment
Materials
Options
Data Sheet
IBC Spill Container
Supplied c/w IBC Bunded and Side Walls for all round containment of IBC contentsAvailable in a number of materials including:PolypropyleneAluminiumStainless SteelGalvanised SteelField proven designUsed for spill free storage and decanting from 1000L IBC'sThe IBC Spill Container incorporates as standard:IBC Spill Container 1000 litreIBC Mounting StandOptional Pump PlatformConceptThe unit is designed to be a self contained transportable assembly.The IBC is positioned on top of the fabricated spill container.Retention capacity of the container is in excess of 1,000 litres. The external container is fabricated from 19mm polypropylene sheet.All seams are fully welded internally and externally. No drillings in the spill container occur below the retention capacity level. The internal support frame and decking are fabricated from extruded plastics.All materials are selected to maximise corrosion resistance both from chemical attack and from atmospheric conditions. The spill container incorporates integral skids to allow positioning on semi prepared surfaces.A 2 drain plug complete with screwed bung is positioned in the right hand front corner.IBC MountingThe IBCs are lifted onto the top deck, guard rails on three sides aid in positioning. The IBC deck is designed to accept both standard 1180 x 1180 mm footprint IBCs and ISO pallet sized IBCs at 1200 x 1000 mm..The IBC deck stands at a height of 1,080 mm to suit truck tray heights. An optional tie down webbing strap is available to locate the IBC in windy environments.Pump PlatformAn optional pump mounting platform is positioned in front of the buffer tank.Pumps, valves, regulators, etc. can be mounted on the platform.All mounted components are within the spill container envelopeStandard EquipmentLift: 4 top lift cables (empty only)Drain: 2 threaded drain bungBase: Integral SkidsMaterialsShell: 19mm polypropylene sheeting Skid: 100 x 100 mm extruded plasticFrame: 100 x 50mm extruded plasticOptionsIBC tie down strapIBC UV Sun Cover
Supplied c/w IBC Bunded and Side Walls for all round containment of IBC contents
Available in a number of materials including:
IBC Spill Container c/w buffer tank and pump platform
The unit incorporates as standard:•IBC Spill Container 1000 litre•IBC Mounting Stand•275 litre Buffer Tank•Pump Mounting PlatformConceptThe unit is designed to be a self contained transportable assembly.The IBC decants directly into the integral buffer tank to enable:•The IBC to be removed without interrupting flow to process.•The IBC to be fully decanted before removal.•275 litres is retained in the buffer tank as an emergency supply. IBC Spill ContainerThe IBC is positioned on top of the fabricated spill container.Retention capacity of the container is in excess of 1,000 litres. The external container is fabricated from 16 and 19mm polypropylene sheet.All seams are fully welded internally and externally. No drillings in the spill container occur below the retention capacity level. The internal support frame and decking are fabricated from extruded plastics.All materials are selected to maximise corrosion resistance both from chemical attack and from atmospheric conditions. The spill container incorporates integral skids to allow positioning on semi prepared surfaces. IBC MountingThe IBCs are lifted onto the top deck, guard rails on three sides aid in positioning. The IBC deck is designed to accept both standard 1180 x 1180 mm footprint IBCs and ISO pallet sized IBCs at 1200 x 1000 mm footprint.The IBC deck stands at a height of 1,080 mm to suit truck tray heights. An optional tie down webbing strap is available to locate the IBC in windy environments.Buffer TankA 275 litre LLDPE opaque buffer tank is incorporated into the frame.The IBC decants liquid into the top of the buffer tank via a flexible 2 hose assembly complete with camloc adapters.Discharge into the process stream is from the bottom of the buffer tank. A 2 polypropylene ball valve is fitted to the discharge point complete with a camloc adapter and dust cap. Stainless steel security cables are fitted to the camloc dust caps. Pump PlatformA pump mounting platform is positioned in front of the buffer tank.Pumps, valves, regulators, etc. can be mounted on the platform.All mounted components are within the spill container envelopeProduct CleanlinessWhen decanting from the buffer tank only the hose is connected to an integral breather.Standard EquipmentDischarge: 2 ball valve c/w camloc Fill: 2 male camlocBreather: 1 to 2 male camlocLift: 4 top lift cables (empty only)Drain: 2 threaded drain bungMaterialsShell: 16 & 19mm polypropylene sheeting Skid: 110 x 60 mm extruded plasticFrame: 150 x 50 mm extruded plasticCamlocs: PolypropyleneValves: PolypropyleneBuffer Tank: LLDPEOptionsDry break couplingsIBC Tie Down StrapIBC to Tank HoseIBC UV sun cover
The unit incorporates as standard:
•IBC Spill Container 1000 litre
•IBC Mounting Stand
•275 litre Buffer Tank
•Pump Mounting Platform
The IBC decants directly into the integral buffer tank to enable:
•The IBC to be removed without interrupting flow to process.
•The IBC to be fully decanted before removal.
•275 litres is retained in the buffer tank as an emergency supply.
The IBC is positioned on top of the fabricated spill container.
Retention capacity of the container is in excess of 1,000 litres.
The external container is fabricated from 16 and 19mm polypropylene sheet.
All seams are fully welded internally and externally. No drillings in the spill container occur below the retention capacity level.
The internal support frame and decking are fabricated from extruded plastics.
All materials are selected to maximise corrosion resistance both from chemical attack and from atmospheric conditions.
The spill container incorporates integral skids to allow positioning on semi prepared surfaces.
The IBCs are lifted onto the top deck, guard rails on three sides aid in positioning.
The IBC deck is designed to accept both standard 1180 x 1180 mm footprint IBCs and ISO pallet sized IBCs at 1200 x 1000 mm footprint.
The IBC deck stands at a height of 1,080 mm to suit truck tray heights.
An optional tie down webbing strap is available to locate the IBC in windy environments.
Buffer Tank
A 275 litre LLDPE opaque buffer tank is incorporated into the frame.
The IBC decants liquid into the top of the buffer tank via a flexible 2 hose assembly complete with camloc adapters.
Discharge into the process stream is from the bottom of the buffer tank.
A 2 polypropylene ball valve is fitted to the discharge point complete with a camloc adapter and dust cap. Stainless steel security cables are fitted to the camloc dust caps.
A pump mounting platform is positioned in front of the buffer tank.
Pumps, valves, regulators, etc. can be mounted on the platform.
All mounted components are within the spill container envelope
Product Cleanliness
When decanting from the buffer tank only the hose is connected to an integral breather.
Discharge: 2 ball valve c/w camloc
Fill: 2 male camloc
Breather: 1 to 2 male camloc
Lift: 4 top lift cables (empty only)
Drain: 2 threaded drain bung
Shell: 16 & 19mm polypropylene sheeting
Skid: 110 x 60 mm extruded plastic
Frame: 150 x 50 mm extruded plastic
Camlocs: Polypropylene
Valves: Polypropylene
Buffer Tank: LLDPE
Dry break couplings
IBC Tie Down Strap
IBC to Tank Hose
IBC UV sun cover
©Transtainer 2010. Industry Leading Designer, Manufacturer and Marketer of IBC's, Portable Tanks and Ancillary Equipment
