FOOD-TAINER
HOME
Composite
The Light Service series of plastic IBCs are specifically designed for the semi bulk transportation, storage and dispensing of Liquids, including Dangerous Goods related Liquids The rectangular design and low tare weight of the IBC optimises space requirements for both transportation and warehousing.The low tare weight also ensures optimum use of transportation.The IBC is designed for Top Fill and Bottom Discharge. Product can be dispensed via gravity or be aided by a customer supplied pump set for rapid decanting.Inner ContainerThe inner container is made from high molecular weight, high density polyethylene, blow moulded and shaped to shed external water.Outer FrameThe inner container is protected by a welded galvanised tubular steel lattice-work frame, with a large permanently fixed ID plate.Minimal ResidualThe IBC incorporates a pressed galvanised steel base shaped to support the inner container and sloped to the outlet to assist total drainage and ensure expensive residual is kept to a minimum.Reduced ContaminationMaximum drainage and radiused corners allow ease of cleaning and ensure cross contamination is kept to a minimum.SafetyThe IBC is designed to be moved with a forklift or pallet truck and incorporates a 4-way entry, steel runner pallet.Bulk DeliverySavings can be achieved by purchasing in bulk and with reduced internal handling costs.StorageThe footprint of the IBC is based on a standard international pallet size for ease of storage and transport.The IBC can be stacked for transport and storage and provide an excellent fit in ISO-ContainersVentingThe IBC is available with a range of venting options including pressure and vacuum vents, to best suit specific applications.Top FillThe IBC is designed for top fill via the 150mm screwed cap opening.Bottom DischargeA specially designed 50mm discharge valve, complete with secondary screw cap closure, is provided as standard for safe and precise control of contents during emptying.Also provided is an outlet nozzle which is stored adjacent to the discharge valve.The discharge valve is recessed within the outer parameters of the unit to ensure maximum protection.Standard EquipmentDischarge: 2 Ball valve Fill: 150 mm screwed capMaterialsInner: Polyethylene Frame: 15mm tubular steelOptionsHeater BlanketValve adapters
Inner Container
The inner container is made from high molecular weight, high density polyethylene, blow moulded and shaped to shed external water.
Outer Frame
The inner container is protected by a welded galvanised tubular steel lattice-work frame, with a large permanently fixed ID plate.
Minimal Residual
The IBC incorporates a pressed galvanised steel base shaped to support the inner container and sloped to the outlet to assist total drainage and ensure expensive residual is kept to a minimum.
Reduced Contamination
Maximum drainage and radiused corners allow ease of cleaning and ensure cross contamination is kept to a minimum.
Safety
The IBC is designed to be moved with a forklift or pallet truck and incorporates a 4-way entry, steel runner pallet.
Bulk Delivery
Savings can be achieved by purchasing in bulk and with reduced internal handling costs.
Storage
The footprint of the IBC is based on a standard international pallet size for ease of storage and transport.
The IBC can be stacked for transport and storage and provide an excellent fit in ISO-Containers
Venting
The IBC is available with a range of venting options including pressure and vacuum vents, to best suit specific applications.
Top Fill
The IBC is designed for top fill via the 150mm screwed cap opening.
Bottom Discharge
A specially designed 50mm discharge valve, complete with secondary screw cap closure, is provided as standard for safe and precise control of contents during emptying.
Also provided is an outlet nozzle which is stored adjacent to the discharge valve.
The discharge valve is recessed within the outer parameters of the unit to ensure maximum protection.
Standard Equipment
Discharge: 2 Ball valve
Fill: 150 mm screwed cap
Materials
Inner: Polyethylene
Frame: 15mm tubular steel
Options
Heater Blanket
Valve adapters
Data Sheet
Heavy Duty Composite
The General Service series of square rigid plastics IBCs are specifically designed for the semi bulk storage, transportation and dispensing of liquids classified as Dangerous Goods.The square design of the General Service IBC optimises space requirements for both transportation and warehousing.The General Service IBC is bottom discharge designed to dispense product via gravity or be aided by a pump set for rapid decanting.Robust DesignThe General Service IBC is constructed from rotomoulded UV stabilised polyethylene. The outer heavy duty steel frame is fitted with mesh protection; all steel components are hot dipped galvanised. The mesh is welded on the inside of the frame to minimise damage and weld breakageAreas subject to wear and tear are reinforced with guard plates.SafetyThe IBC is designed to be moved with a forklift and incorporate a four way fork entry.The frame incorporates four reinforced lifting points tested at twice the total mass. Lifting lugs are available as an option.Galvanised panels are fitted on all sides to allow fitting of 400 x 300 mm EIP stickers. StorageThe footprint of the IBC is based on a standard pallet size for ease of transport and storage. The General Service series can be stacked for storage.Top FillFill is via a top mounted 150mm screwed cap fitted with two Viton O rings to ensure positive sealingThe cap incorporates raised sections enabling a flat bar to be used for opening and closing.A 50mm screwed cap is fitted inside the main 150mm lid.Bottom DischargeThe IBC is fitted as standard with a full bore 2 ball valve and camloc coupling. Dry break adapters and alternative valve types are available. The discharge assembly is recessed within the frame for protection.VentingPressure and vacuum vents are available as optionsReduced ContaminationMaximum drainage ensures cross contamination is kept to a minimum. Standard EquipmentDischarge: 2 ball valve c/w camlocs Fill: 150mm screwed capBottom lift: 4 way fork entryTop Lift: 4 lifting holes in cross bracesMaterialsShell: polyethylene Frame: galvanised steelValve: PVCCamlocs: polypropyleneOptionsDry break couplingsDessicant FiltrationVapour recovery point Pressure and Vacuum VentsCorner top lifting lugs (4)Polypropylene ball valveNet Weight: 217 kgCapacity: 1000 litresMaximum liquid specific gravity: 20Test Pressure: 150 kPa
The General Service series of square rigid plastics IBCs are specifically designed for the semi bulk storage, transportation and dispensing of liquids classified as Dangerous Goods.
The square design of the General Service IBC optimises space requirements for both transportation and warehousing.
The General Service IBC is bottom discharge designed to dispense product via gravity or be aided by a pump set for rapid decanting.
Robust Design
The General Service IBC is constructed from rotomoulded UV stabilised polyethylene.
The outer heavy duty steel frame is fitted with mesh protection; all steel components are hot dipped galvanised.
The mesh is welded on the inside of the frame to minimise damage and weld breakage
Areas subject to wear and tear are reinforced with guard plates.
The IBC is designed to be moved with a forklift and incorporate a four way fork entry.
The frame incorporates four reinforced lifting points tested at twice the total mass. Lifting lugs are available as an option.
Galvanised panels are fitted on all sides to allow fitting of 400 x 300 mm EIP stickers.
The footprint of the IBC is based on a standard pallet size for ease of transport and storage. The General Service series can be stacked for storage.
Fill is via a top mounted 150mm screwed cap fitted with two Viton O rings to ensure positive sealing
The cap incorporates raised sections enabling a flat bar to be used for opening and closing.
A 50mm screwed cap is fitted inside the main 150mm lid.
The IBC is fitted as standard with a full bore 2 ball valve and camloc coupling.
Dry break adapters and alternative valve types are available.
The discharge assembly is recessed within the frame for protection.
Pressure and vacuum vents are available as options
Maximum drainage ensures cross contamination is kept to a minimum.
Discharge: 2 ball valve c/w camlocs
Fill: 150mm screwed cap
Bottom lift: 4 way fork entry
Top Lift: 4 lifting holes in cross braces
Shell: polyethylene
Frame: galvanised steel
Valve: PVC
Camlocs: polypropylene
Dry break couplings
Dessicant Filtration
Vapour recovery point
Pressure and Vacuum Vents
Corner top lifting lugs (4)
Polypropylene ball valve
Net Weight: 217 kg
Capacity: 1000 litres
Maximum liquid specific gravity: 20
Test Pressure: 150 kPa
Stainless Steel Square
Sizes500L1000L1250L1500LFeatures and BenefitsUN31H1/Y ApprovedField Proven DesignReduced ContaminationMinimal ResidualUsagesDeliveryStorageTransportDecantingLiquidsHazardous LiquidsCorrosive LiquidsDangerous GoodsIntermediate Bulk Containers with UN31A/Y approval for the transport of Dangerous Goods by Road, Rail and Sea, Packaging Groups II & III, Classes 3,5,6,8 & 9 when used in accordance with the relevant code.The Dangerous Goods series of square stainless steel IBCs are specifically designed for the semi bulk storage, transportation and dispensing of liquids classified as Dangerous Goods.The Dangerous Goods IBCs are both top fill and top discharge for applications where product integrity is critical.The square design of the Dangerous Goods IBCs optimises space requirements for both transportation and warehousing.Robust DesignThe Dangerous Goods IBCs are constructed from 3mm plate. Radiused corners and a self supporting tank ensure maximum service life.Areas subject to wear and tear are reinforced with guard plates.SafetyThe IBC is designed to be moved with a forklift and incorporate skid pockets which fully encase the forklift tynes for operator safety.The Coaming incorporates four reinforced lifting points tested at over twice the total mass of the unit.The Coaming also protects ancillary equipment fitted to the tank top and acts as an interlock when the units are stacked.All access points are available with locking capability if required.An earth lug is fitted as standard.StorageThe footprint of the IBC is based on a standard pallet size for ease of storage and transport. The Dangerous Goods series can be stacked two high for storage.Top FillThe Dangerous Goods IBCs are designed for Top Fill via a full length fill tube terminating in a 50mm NATO camloc adapter and dust cap.Alternatively the unit can be filled via the 150mm inspection hatch.Top DischargeThe IBCs are fitted as standard with a full bore 2 ball valve and camloc coupling. The suction pipe extends to a sump fitted in the base. Dry break adapters and alternative valve sizes are available. VentingCombination manway assembly:a) Pressure venting at 21 kPa.b) Vacuum venting at 3.5 kPa.c) High Temperature relief at 138oCThe manway includes a lockable 150mm inspection hatch.The 460mm manway is located by a bolted clamp-band with locking provision for ease of access when cleaning or inspection is required.Reduced ContaminationMaximum drainage ensures cross contamination is kept to a minimum. Drain points can be fitted if required. Minimal ResidualWith the suction pipe terminating in a sump product residual is kept to a minimum. Radiused corners minimise product hang and simplify cleaning.Standard EquipmentDischarge: 2 ball valve c/w camlocs Fill: 2 fill tube c/w camlocsInspection hatch: 150mm openingVents:Pressure venting 21 kPaVacuum venting 3.5 kPaTemperature relief 138oCMaterialsShell: 3mm stainless plate Skid assembly: 3-8mm stainless plateCamlocs: Aluminium or stainlessValves: Stainless SteelGaskets: TeflonOptionsDry break couplingsDesiccant FiltrationVapour recovery point Dip StickWeather ShieldTop Fill and Top Discharge for Liquids Cleaniless
Sizes
500L
1000L
1250L
1500L
Features and Benefits
UN31H1/Y Approved
Field Proven Design
Usages
Delivery
Transport
Decanting
Liquids
Hazardous Liquids
Corrosive Liquids
Dangerous Goods
Intermediate Bulk Containers with UN31A/Y approval for the transport of Dangerous Goods by Road, Rail and Sea, Packaging Groups II & III, Classes 3,5,6,8 & 9 when used in accordance with the relevant code.
The Dangerous Goods series of square stainless steel IBCs are specifically designed for the semi bulk storage, transportation and dispensing of liquids classified as Dangerous Goods.
The Dangerous Goods IBCs are both top fill and top discharge for applications where product integrity is critical.
The square design of the Dangerous Goods IBCs optimises space requirements for both transportation and warehousing.
The Dangerous Goods IBCs are constructed from 3mm plate.
Radiused corners and a self supporting tank ensure maximum service life.
The IBC is designed to be moved with a forklift and incorporate skid pockets which fully encase the forklift tynes for operator safety.
The Coaming incorporates four reinforced lifting points tested at over twice the total mass of the unit.
The Coaming also protects ancillary equipment fitted to the tank top and acts as an interlock when the units are stacked.
All access points are available with locking capability if required.
An earth lug is fitted as standard.
The footprint of the IBC is based on a standard pallet size for ease of storage and transport. The Dangerous Goods series can be stacked two high for storage.
The Dangerous Goods IBCs are designed for Top Fill via a full length fill tube terminating in a 50mm NATO camloc adapter and dust cap.
Alternatively the unit can be filled via the 150mm inspection hatch.
Top Discharge
The IBCs are fitted as standard with a full bore 2 ball valve and camloc coupling. The suction pipe extends to a sump fitted in the base. Dry break adapters and alternative valve sizes are available.
Combination manway assembly:
a) Pressure venting at 21 kPa.
b) Vacuum venting at 3.5 kPa.
c) High Temperature relief at 138oC
The manway includes a lockable 150mm inspection hatch.
The 460mm manway is located by a bolted clamp-band with locking provision for ease of access when cleaning or inspection is required.
Maximum drainage ensures cross contamination is kept to a minimum. Drain points can be fitted if required.
With the suction pipe terminating in a sump product residual is kept to a minimum. Radiused corners minimise product hang and simplify cleaning.
Fill: 2 fill tube c/w camlocs
Inspection hatch: 150mm opening
Vents:
Pressure venting 21 kPa
Vacuum venting 3.5 kPa
Temperature relief 138oC
Shell: 3mm stainless plate
Skid assembly: 3-8mm stainless plate
Camlocs: Aluminium or stainless
Valves: Stainless Steel
Gaskets: Teflon
Desiccant Filtration
Dip Stick
Weather Shield
Top Fill and Top Discharge for Liquids Cleaniless
Stainless Steel Cylindrical
Sizes500L1000L1250L1500LFeatures and BenefitsUN31H1/Y ApprovedField Proven DesignReduced ContaminationMinimal ResidualUsagesDeliveryStorageTransportDecantingLiquidsHazardous LiquidsCorrosive LiquidsDangerous GoodsIntermediate Bulk Containers with UN31A/Y approval for the transport of Dangerous Goods by Road, Rail and Sea, Packaging Groups II & III, Classes 3,5,6,8 & 9 when used in accordance with the relevant code.The Dangerous Goods series of round stainless steel IBCs are specifically designed for the semi bulk storage, transportation and dispensing of liquids classified as Dangerous Goods.The Round design of the Dangerous Goods IBC ensures maximum service life in severe operating conditions.The Dangerous Goods IBCs are bottom discharge designed to dispense product via gravity or be aided by a pump set for rapid decanting.Robust DesignThe Dangerous Goods IBCs are constructed from 3mm plate. The round design minimises side wall fatigue due to wave motion during transport.Areas subject to wear, tear and damage are reinforced with guard and striker plates.SafetyThe IBC is designed to be moved with a forklift and incorporate skid pockets which fully encase the forklift tynes for operator safety.The Coaming incorporates four reinforced lifting points tested at over twice the total mass of the unit.The Coaming also protects ancillary equipment fitted to the tank top and acts as an interlock when the units are stacked.All access points are available with locking capability if required.An earth lug is fitted as standard.StorageThe base of the IBC is based on a 1190mm by 1170mm footprint for ease of storage and transport. The Dangerous Goods series can be stacked two high for storage.Top FillThe Dangerous Goods IBCs are designed for Top Fill via a full length stainless steel fill tube terminating in a 50mm NATO camloc adapter and dust cap.Alternatively the unit can be filled via the 150mm inspection hatch.High Volume Bottom DischargeThe IBCs are fitted as standard with a full bore 2 ball valve and camloc coupling. Dry break adapters and alternative valve sizes are available. VentingCombination manway assembly:a) Pressure venting at 21 kPa.b) Vacuum venting at 3.5 kPa.c) High Temperature relief at 138oCT 460mm manway is located by a bolted clamp-band with locking provision for ease of access when cleaning or inspection is required.Reduced Contamination Maximum drainage ensures cross contamination is kept to a minimum. Sample points can be fitted if required. Minimal ResidualThe IBC incorporates a sloped base at 3o leading to an offset outlet to ensure product residual is kept to a minimum. Radiused corners minimise product hang and simplify cleaning.Standard EquipmentDischarge: 2 ball valve c/w camlocs Fill: 2 fill tube c/w camlocsInspection hatch: 150mm openingVents:Pressure venting 21 kPaVacuum venting 3.5 kPaTemperature relief 138oCMaterialsShell: 3mm stainless plate Skid assembly: 3-8mm stainless plateCamlocs: Aluminium or stainlessValves: Stainless SteelGaskets: TeflonOptionsDry break couplingsDesiccant FiltrationVapour recovery point Dip StickWeather ShieldTop Fill and Top Discharge for Liquids CleanilessManifest holder
The Dangerous Goods series of round stainless steel IBCs are specifically designed for the semi bulk storage, transportation and dispensing of liquids classified as Dangerous Goods.
The Round design of the Dangerous Goods IBC ensures maximum service life in severe operating conditions.
The Dangerous Goods IBCs are bottom discharge designed to dispense product via gravity or be aided by a pump set for rapid decanting.
The round design minimises side wall fatigue due to wave motion during transport.
Areas subject to wear, tear and damage are reinforced with guard and striker plates.
The base of the IBC is based on a 1190mm by 1170mm footprint for ease of storage and transport. The Dangerous Goods series can be stacked two high for storage.
The Dangerous Goods IBCs are designed for Top Fill via a full length stainless steel fill tube terminating in a 50mm NATO camloc adapter and dust cap.
High Volume Bottom Discharge
The IBCs are fitted as standard with a full bore 2 ball valve and camloc coupling. Dry break adapters and alternative valve sizes are available.
T 460mm manway is located by a bolted clamp-band with locking provision for ease of access when cleaning or inspection is required.
Maximum drainage ensures cross contamination is kept to a minimum. Sample points can be fitted if required.
The IBC incorporates a sloped base at 3o leading to an offset outlet to ensure product residual is kept to a minimum. Radiused corners minimise product hang and simplify cleaning.
Manifest holder
Accessories
Agitator AssemblyAgitators are available as either fixed or removable assemblies. Removable units are traditionally located via a Triclover fitting for ease of field usage.Impellor sizes and operating speed are selected to best suit the properties of the medium to be agitated or stirred.Motors are either pneumatic or electric with fixed or variable speed; class 1 zone 1 enclosures are available.Contents GaugeTo allow remote visual indication without affecting the integrity of the IBC poppet type indicators are available.The gauges are available in a variety of materials including stainless steel, aluminium and plastic.For maximum protection the indicator tube is available with either a stainless steel or coated carbon steel guard.Decanting AdapterDesigned to allow decanting whilst the Dangerous Goods series IBCs are stacked.The stainless steel Decanting Adapter is built to the same high standards as the Liqua-Tainers offering a minimum of 50mm interlock for safe field operation. The unit is designed for retro-fitting to existing IBCs.Hoses supplied are of composite construction fitted with matching camlocs. Hose selection is based on compatibility of the medium to be transferred.Liquid Level IndicatorThe sight tube is fully enclosed on three sides by a stainless steel frame, the front being a clear polycarbonate cover. The cover is available with various scales indicating height or calibration rates to customer specifications.Connection is via camloc couplings and isolation valves, an access port is provided in the Stacking Ring. The unit can be removed and fitted in the field.Heating BlanketA removable insulated Heating blanket has been designed allowing product to be heated whilst in the IBC.The unit is available with 500, 700, 1500 and a 2200 watt integral element, the external cover provides insulation.Temperature control is either by sensing skin temperature or via in internal probe. Control boxes with field adjustable thermostats are available.Weather-shieldWhere IBCs are being used for the transport of hydroscopic liquids or being operated in high rainfall regions Weather-shields are offered to prevent water pooling on the Pressure Manway.The Weather-shield is constructed from aluminium and uses two stainless steel spring clips for locking.The design allows retro-fitting to existing units without hot work. Weather-shields are fitted as standard for Aviation fuel applications.Unloading StandsUnloading stands to suit the Dangerous Goods range of IBCs are available.The standard unloader is a fabricated steel stand to bring theIBC to a preferred working height, typically 100, 250 or 500 mm. The stand is fitted with guides inclined at 15o to firmly locate the IBCs
Agitator Assembly
Agitators are available as either fixed or removable assemblies.
Removable units are traditionally located via a Triclover fitting for ease of field usage.
Impellor sizes and operating speed are selected to best suit the properties of the medium to be agitated or stirred.
Motors are either pneumatic or electric with fixed or variable speed; class 1 zone 1 enclosures are available.
Contents Gauge
To allow remote visual indication without affecting the integrity of the IBC poppet type indicators are available.
The gauges are available in a variety of materials including stainless steel, aluminium and plastic.
For maximum protection the indicator tube is available with either a stainless steel or coated carbon steel guard.
Decanting Adapter
Designed to allow decanting whilst the Dangerous Goods series IBCs are stacked.
The stainless steel Decanting Adapter is built to the same high standards as the Liqua-Tainers offering a minimum of 50mm interlock for safe field operation.
The unit is designed for retro-fitting to existing IBCs.
Hoses supplied are of composite construction fitted with matching camlocs. Hose selection is based on compatibility of the medium to be transferred.
Liquid Level Indicator
The sight tube is fully enclosed on three sides by a stainless steel frame, the front being a clear polycarbonate cover.
The cover is available with various scales indicating height or calibration rates to customer specifications.
Connection is via camloc couplings and isolation valves, an access port is provided in the Stacking Ring. The unit can be removed and fitted in the field.
Heating Blanket
A removable insulated Heating blanket has been designed allowing product to be heated whilst in the IBC.
The unit is available with 500, 700, 1500 and a 2200 watt integral element, the external cover provides insulation.
Temperature control is either by sensing skin temperature or via in internal probe. Control boxes with field adjustable thermostats are available.
Weather-shield
Where IBCs are being used for the transport of hydroscopic liquids or being operated in high rainfall regions Weather-shields are offered to prevent water pooling on the Pressure Manway.
The Weather-shield is constructed from aluminium and uses two stainless steel spring clips for locking.
The design allows retro-fitting to existing units without hot work. Weather-shields are fitted as standard for Aviation fuel applications.
Unloading Stands
Unloading stands to suit the Dangerous Goods range of IBCs are available.
The standard unloader is a fabricated steel stand to bring theIBC to a preferred working height, typically 100, 250 or 500 mm. The stand is fitted with guides inclined at 15o to firmly locate the IBCs
Data Sheet - Square
Data Sheet - Round
©Transtainer 2010. Industry Leading Designer, Manufacturer and Marketer of IBC's, Portable Tanks and Ancillary Equipment
