Features and Benefits
•Minimal Residual
•Minimal Product Contamination
•Provides Pumping Assistance
•Field Proven Design
•Real Time Product Indication
Usage
•Delivery
•Storage
•Dispensing
•Transportation
Capacities
•500 L
•700 L
•1000 L
•1200 L
•1450 L
Applications
•Grease
•Adhesives
•Ink
•Pastes
•Coatings
The Ink-Tainer series are specifically designed for the semi bulk storage, transportation and dispensing of all grades of Ink.
The Ink-Tainer series are based on a reduced footprint to ensure effective space utilisation when loading into shipping containers and confined areas.
The design of the Ink-Tainer series is based on customer input and field feedback to ensure ease of operation and maximum service life.
This feedback has resulted in a unique design that addresses the concerns and problems traditionally encountered with conventional style Ink IBC's.
Design
The Ink-Tainer series are circular in design to allow the inclusion of a unique flexible pressurised follower system.
The follower operates as a flexible wiper, scraping product from the walls during decanting to minimise residual and cross contamination concerns.
The circular design also offers greater strength when compared with square designs, allowing the area above the follower to be pressurised with low pressure compressed air.
Air pressure (28-32 kPa) acting on top of the follower assists in
the downward movement to minimise void pockets occurring and to force feed product to the suction side of the pump.
A combination pressure and vacuum vent is fitted to prevent over pressurisation of the vessel and to allow product draw off, should air pressure fail or not be available.
The Ink-Tainer series are Bottom Discharge and Bottom Fill via a 3 ball valve complete with camloc adapter and dust cap.
Materials of construction include Carbon Steel or Stainless Steel.
Minimal Residual
The circular design, flexible follower and discharge sump configuration ensure product residual is minimised.
Traditionally less than 5-10 kg is retained within the sump and discharge pipe.
Reduced Contamination
With air pressure acting on top of the Follower, external air borne contaminates (dust, moisture, etc) are excluded from the product.
Safety
The Ink-Tainer series are designed to be moved with a forklift and incorporate skid pockets that fully encase the forklift tynes for operator safety.
Four way fork entry is provided as standard. Lifting lugs are optional for top lifting with slings or cables.
A Coaming is fitted to offer protection to ancillary equipment fitted in the top shell.
Robust Design
The circular design is inherently extremely robust, to ensure maximum service life in severe operating environments.
Areas subject to wear, tear and damage are heavily reinforced with striker and guard plates.
Standard Equipment
Fill / Discharge Point: 3 Ball valve
Coupling: 3 Camloc adapter and cap
External Level Indicator
Vents: Pressure 35 kPa, Vacuum -3.5kPa
Air Line Fitting: 0.25 BSP(F) socket
Bottom Lift: Four way forklift entry
Top Lift: Four lifting lugs
Materials
Shell: 3mm plate
Lid: 6mm plate
Skid Assembly: 3-8mm plate
Skid Feet: 10mm plate
Lid & Vent Gaskets: Nitrile
Follower: synthetic
Lifting Lugs: 12 mm plate
Options
Air regulator and gauge
Pump spear adaptor
Unloader stand
Corporate colours
Lifting lugs
Remote air line
Stainless label panel
©Transtainer 2010. Industry Leading Designer, Manufacturer and Marketer of IBC's, Portable Tanks and Ancillary Equipment
