LUBE-TAINER
HOME
Composite
The Light Service series of plastic IBCs are specifically designed for the semi bulk transportation, storage and dispensing of Liquids, including Dangerous Goods related Liquids The rectangular design and low tare weight of the IBC optimises space requirements for both transportation and warehousing.The low tare weight also ensures optimum use of transportation.The IBC is designed for Top Fill and Bottom Discharge. Product can be dispensed via gravity or be aided by a customer supplied pump set for rapid decanting.Inner ContainerThe inner container is made from high molecular weight, high density polyethylene, blow moulded and shaped to shed external water.Outer FrameThe inner container is protected by a welded galvanised tubular steel lattice-work frame, with a large permanently fixed ID plate.Minimal ResidualThe IBC incorporates a pressed galvanised steel base shaped to support the inner container and sloped to the outlet to assist total drainage and ensure expensive residual is kept to a minimum.Reduced ContaminationMaximum drainage and radiused corners allow ease of cleaning and ensure cross contamination is kept to a minimum.SafetyThe IBC is designed to be moved with a forklift or pallet truck and incorporates a 4-way entry, steel runner pallet.Bulk DeliverySavings can be achieved by purchasing in bulk and with reduced internal handling costs.StorageThe footprint of the IBC is based on a standard international pallet size for ease of storage and transport.The IBC can be stacked for transport and storage and provide an excellent fit in ISO-ContainersVentingThe IBC is available with a range of venting options including pressure and vacuum vents, to best suit specific applications.Top FillThe IBC is designed for top fill via the 150mm screwed cap opening.Bottom DischargeA specially designed 50mm discharge valve, complete with secondary screw cap closure, is provided as standard for safe and precise control of contents during emptying.Also provided is an outlet nozzle which is stored adjacent to the discharge valve.The discharge valve is recessed within the outer parameters of the unit to ensure maximum protection.Standard EquipmentDischarge: 2 Ball valve Fill: 150 mm screwed capMaterialsInner: Polyethylene Frame: 15mm tubular steelOptionsHeater BlanketValve adapters
Inner Container
The inner container is made from high molecular weight, high density polyethylene, blow moulded and shaped to shed external water.
Outer Frame
The inner container is protected by a welded galvanised tubular steel lattice-work frame, with a large permanently fixed ID plate.
Minimal Residual
The IBC incorporates a pressed galvanised steel base shaped to support the inner container and sloped to the outlet to assist total drainage and ensure expensive residual is kept to a minimum.
Reduced Contamination
Maximum drainage and radiused corners allow ease of cleaning and ensure cross contamination is kept to a minimum.
Safety
The IBC is designed to be moved with a forklift or pallet truck and incorporates a 4-way entry, steel runner pallet.
Bulk Delivery
Savings can be achieved by purchasing in bulk and with reduced internal handling costs.
Storage
The footprint of the IBC is based on a standard international pallet size for ease of storage and transport.
The IBC can be stacked for transport and storage and provide an excellent fit in ISO-Containers
Venting
The IBC is available with a range of venting options including pressure and vacuum vents, to best suit specific applications.
Top Fill
The IBC is designed for top fill via the 150mm screwed cap opening.
Bottom Discharge
A specially designed 50mm discharge valve, complete with secondary screw cap closure, is provided as standard for safe and precise control of contents during emptying.
Also provided is an outlet nozzle which is stored adjacent to the discharge valve.
The discharge valve is recessed within the outer parameters of the unit to ensure maximum protection.
Standard Equipment
Discharge: 2 Ball valve
Fill: 150 mm screwed cap
Materials
Inner: Polyethylene
Frame: 15mm tubular steel
Options
Heater Blanket
Valve adapters
Data Sheet
Heavy Duty Composite
The General Service series of square rigid plastics IBCs are specifically designed for the semi bulk storage, transportation and dispensing of liquids classified as Dangerous Goods.The square design of the General Service IBC optimises space requirements for both transportation and warehousing.The General Service IBC is bottom discharge designed to dispense product via gravity or be aided by a pump set for rapid decanting.Robust DesignThe General Service IBC is constructed from rotomoulded UV stabilised polyethylene. The outer heavy duty steel frame is fitted with mesh protection; all steel components are hot dipped galvanised. The mesh is welded on the inside of the frame to minimise damage and weld breakageAreas subject to wear and tear are reinforced with guard plates.SafetyThe IBC is designed to be moved with a forklift and incorporate a four way fork entry.The frame incorporates four reinforced lifting points tested at twice the total mass. Lifting lugs are available as an option.Galvanised panels are fitted on all sides to allow fitting of 400 x 300 mm EIP stickers. StorageThe footprint of the IBC is based on a standard pallet size for ease of transport and storage. The General Service series can be stacked for storage.Top FillFill is via a top mounted 150mm screwed cap fitted with two Viton O rings to ensure positive sealingThe cap incorporates raised sections enabling a flat bar to be used for opening and closing.A 50mm screwed cap is fitted inside the main 150mm lid.Bottom DischargeThe IBC is fitted as standard with a full bore 2 ball valve and camloc coupling. Dry break adapters and alternative valve types are available. The discharge assembly is recessed within the frame for protection.VentingPressure and vacuum vents are available as optionsReduced ContaminationMaximum drainage ensures cross contamination is kept to a minimum. Standard EquipmentDischarge: 2 ball valve c/w camlocs Fill: 150mm screwed capBottom lift: 4 way fork entryTop Lift: 4 lifting holes in cross bracesMaterialsShell: polyethylene Frame: galvanised steelValve: PVCCamlocs: polypropyleneOptionsDry break couplingsDessicant FiltrationVapour recovery point Pressure and Vacuum VentsCorner top lifting lugs (4)Polypropylene ball valveNet Weight: 217 kgCapacity: 1000 litresMaximum liquid specific gravity: 20Test Pressure: 150 kPa
The General Service series of square rigid plastics IBCs are specifically designed for the semi bulk storage, transportation and dispensing of liquids classified as Dangerous Goods.
The square design of the General Service IBC optimises space requirements for both transportation and warehousing.
The General Service IBC is bottom discharge designed to dispense product via gravity or be aided by a pump set for rapid decanting.
Robust Design
The General Service IBC is constructed from rotomoulded UV stabilised polyethylene.
The outer heavy duty steel frame is fitted with mesh protection; all steel components are hot dipped galvanised.
The mesh is welded on the inside of the frame to minimise damage and weld breakage
Areas subject to wear and tear are reinforced with guard plates.
The IBC is designed to be moved with a forklift and incorporate a four way fork entry.
The frame incorporates four reinforced lifting points tested at twice the total mass. Lifting lugs are available as an option.
Galvanised panels are fitted on all sides to allow fitting of 400 x 300 mm EIP stickers.
The footprint of the IBC is based on a standard pallet size for ease of transport and storage. The General Service series can be stacked for storage.
Fill is via a top mounted 150mm screwed cap fitted with two Viton O rings to ensure positive sealing
The cap incorporates raised sections enabling a flat bar to be used for opening and closing.
A 50mm screwed cap is fitted inside the main 150mm lid.
The IBC is fitted as standard with a full bore 2 ball valve and camloc coupling.
Dry break adapters and alternative valve types are available.
The discharge assembly is recessed within the frame for protection.
Pressure and vacuum vents are available as options
Maximum drainage ensures cross contamination is kept to a minimum.
Discharge: 2 ball valve c/w camlocs
Fill: 150mm screwed cap
Bottom lift: 4 way fork entry
Top Lift: 4 lifting holes in cross braces
Shell: polyethylene
Frame: galvanised steel
Valve: PVC
Camlocs: polypropylene
Dry break couplings
Dessicant Filtration
Vapour recovery point
Pressure and Vacuum Vents
Corner top lifting lugs (4)
Polypropylene ball valve
Net Weight: 217 kg
Capacity: 1000 litres
Maximum liquid specific gravity: 20
Test Pressure: 150 kPa
Lube-Cube
Size Range450L950L2000L3000L4500L6300LFeatures and BenefitsUN31 A Y Approved for Transport of Dangerous GoodsAS1692 / AS1940 Approved for Static StorageSelf Bunded (Double Wall) Design110% Secondary ContainmentInner Tank can be Removed for Maintenance / CleaningField Proven DesignUsagesSite Static StorageDeliveryStorage TransportDecantingSelf Bunded Tanks with UN31A/Y approval for the transport of Dangerous Goods by Road, Rail and Sea, Packaging Groups II & IIIThe Transtainer Lube Cubes are fabricated from high grade mild steel. An inner tank contains the initial volume of lubricants. In the unlikely event that this tank develops a leak the outer tank will prevent the lubricants from escaping into the environment. The bunded tank has a capacity of 110% of volume. All seams are robot welded to exacting standards. The Transtainer Lube Cube is designed with an easy removable steel inner tank for maintenance and inspection.Transtainer Lube Cubes are available in a range of capacities idea for transportation by either truck or shipping container and suit most lubricants storage and transport requirements.Robotic welded seams guarantee lasting high quality.The ultimate in quality at very affordable prices.Meet strict quality standards, are PPG2 compliant and EU approved.Three (3) year guaranteeManufactured in heavy duty steel and hot dipped to prevent rust.All pumps, connections and hoses are housed and can be locked within the bund, even in use!Colour is RAL9010 Pure WhiteCan be stacked 3 high when empty and 2 high when full
Size Range
450L
950L
2000L
3000L
4500L
6300L
Features and Benefits
UN31 A Y Approved for Transport of Dangerous Goods
AS1692 / AS1940 Approved for Static Storage
Self Bunded (Double Wall) Design
110% Secondary Containment
Inner Tank can be Removed for Maintenance / Cleaning
Field Proven Design
Usages
Site Static Storage
Delivery
Transport
Decanting
Self Bunded Tanks with UN31A/Y approval for the transport of Dangerous Goods by Road, Rail and Sea, Packaging Groups II & III
The Transtainer Lube Cubes are fabricated from high grade mild steel. An inner tank contains the initial volume of lubricants. In the unlikely event that this tank develops a leak the outer tank will prevent the lubricants from escaping into the environment. The bunded tank has a capacity of 110% of volume. All seams are robot welded to exacting standards. The Transtainer Lube Cube is designed with an easy removable steel inner tank for maintenance and inspection.
Transtainer Lube Cubes are available in a range of capacities idea for transportation by either truck or shipping container and suit most lubricants storage and transport requirements.
cube-tainer
©Transtainer 2010. Industry Leading Designer, Manufacturer and Marketer of IBC's, Portable Tanks and Ancillary Equipment
